Shri Sivaayam Traders

Introducing the Indrola TMT Bar by Sankavi, a top-notch construction solution for reinforcing concrete structures. Crafted with precision and durability in mind, this 90-sized TMT Bar is designed to provide exceptional strength and resilience to your projects.

TMT bars made from 100% Billet. Rudra TMX is one stop solution for TMT requirements producing wide range of grades like Fe500, Fe500D, Fe550, Fe550D, Fe600, CRS and sizes ranging from 8mm to 40mm. Carbon Content below 0.25% in Fe500 and Fe550 and below 0.21% in Fe500D, Fe550D n Fe600.

Fortified with high yield stress, shock resistance and elongation properties, ARS 550D TMT Bars provided maximum earthquake and corrosion resistance. The use of ARS 550D TMT Bars leads to maximum savings in steel in terms of weight and cost. ARS 550D is undeniably the foremost preference of construction industry.

8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm.

Special Features:

• Low carbon content and made from fully killed steel.
• Higher yield strength, Ultimate tensile strength and higher percentage elongation when compared to cold twisted bars of same grade.
• Easy bendability, weldability and excellent ductility ensures economy and safety of use. o In-built ability to resist loss of strength at higher temperature.
• Require less energy for bending and re-bending along with superior reverse bending properties. o Can be butt welded or lap-welded. o Use of Fe-500 grade results in saving more than 15% in steel consumption when compared to cold twisted bars.
• Higher corrosion resistance and seismic resistance compared to CTD.
• Ideally suited for any type of concrete structure.
• Packing : Bare, in strapped bundles / piles weighing 7 to 8 metric tonnes approximately.
•  Invoicing : As per actual weight. 
• Quantity & Shipment: On mutually agreed terms

Quenching and Self Tempering (QST) imparts a composite micro structure ranging from a strong, tough, tempered martensite in the surface layer to a refined, tough, ductile ferrite-pearlite in the core with a intermediate structure in between. Superior rib design for excellent bonding with cement. Mean Projected Area much more than the specified values of the IS1786 standard.

Advantages ..of TMT (QST) Rebars of VSP Combination of high strength and high ductility VIZAG TMT bars have rare combination of high strength with excellent ductility. The tensile to yield strength ratios are always greater than 1.12. In normal bars, the increase in the yield strength of the bars is accompanied by the loss of percent elongation. But in the case of VIZAG TMT bars this loss is negligible and the percent elongation values are much higher than normally specified in various International Standards. In Fe 500D grade rebars the UTS/YS ratio values are maintained always at more than 1.15. Resistance to ageing The tests carried out on the VIZAG TMT bars, indicate that no significant change of strength as a function of time occurs which could affect the usefulness of these bars. Superior corrosion resistance The absence of Eutectoid Carbides and pearlite colonies in VIZAG TMT , absence of stresses because of tempering, presence of martensitic layer at the outside surface and formation of adherent scale film due to water quenching during rolling are the reasons for better corrosion resistance properties of these reinforcement bars.

Excellent bendability and workability The tough outer skin and the ductile core of the VIZAG TMT bars result in excellent bendability. This coupled with a high resistance to low temperature brittle fracture, allows these bars to be bent, without fear of failure around small diameter mandrels. In the reverse bend test, these bars also show good results. In the construction site, situation arises where bars bent are left for a period in the bent condition and then reverse bent. During period between the first bend and the reverse bend the bars may strain age. The loss of ductility due to strain ageing and due to strain imposed from the first bend may cause failure during rebending operations, if the bars are not sufficiently ductile. Test results have shown that VIZAG TMT bars have withstood successfully the bending, straightening and rebending tests after ageing. The bend tests carried out at VSP have shown that these bars could be bent even around smallest dia mandrel without causing any cracking

The only plant to adapt this technology (QST) for production of rebars from the design stage. Hence, the total extent of the superior technology could be harnessed. 120 metres length of the cooling bed available for self tempering which no other mill in India can match is the testimony for this. 

Special Features:

• Low carbon content and made from fully killed steel.
• Higher yield strength, Ultimate tensile strength and higher percentage elongation when compared to cold twisted bars of same grade.
• Easy bendability, weldability and excellent ductility ensures economy and safety of use. o In-built ability to resist loss of strength at higher temperature.
• Require less energy for bending and re-bending along with superior reverse bending properties. o Can be butt welded or lap-welded. o Use of Fe-500 grade results in saving more than 15% in steel consumption when compared to cold twisted bars.
• Higher corrosion resistance and seismic resistance compared to CTD.
• Ideally suited for any type of concrete structure.
• Packing : Bare, in strapped bundles / piles weighing 7 to 8 metric tonnes approximately.
•  Invoicing : As per actual weight. 
• Quantity & Shipment: On mutually agreed terms

Quenching and Self Tempering (QST) imparts a composite micro structure ranging from a strong, tough, tempered martensite in the surface layer to a refined, tough, ductile ferrite-pearlite in the core with a intermediate structure in between. Superior rib design for excellent bonding with cement. Mean Projected Area much more than the specified values of the IS1786 standard.

Advantages ..of TMT (QST) Rebars of VSP Combination of high strength and high ductility VIZAG TMT bars have rare combination of high strength with excellent ductility. The tensile to yield strength ratios are always greater than 1.12. In normal bars, the increase in the yield strength of the bars is accompanied by the loss of percent elongation. But in the case of VIZAG TMT bars this loss is negligible and the percent elongation values are much higher than normally specified in various International Standards. In Fe 500D grade rebars the UTS/YS ratio values are maintained always at more than 1.15. Resistance to ageing The tests carried out on the VIZAG TMT bars, indicate that no significant change of strength as a function of time occurs which could affect the usefulness of these bars. Superior corrosion resistance The absence of Eutectoid Carbides and pearlite colonies in VIZAG TMT , absence of stresses because of tempering, presence of martensitic layer at the outside surface and formation of adherent scale film due to water quenching during rolling are the reasons for better corrosion resistance properties of these reinforcement bars.

Excellent bendability and workability The tough outer skin and the ductile core of the VIZAG TMT bars result in excellent bendability. This coupled with a high resistance to low temperature brittle fracture, allows these bars to be bent, without fear of failure around small diameter mandrels. In the reverse bend test, these bars also show good results. In the construction site, situation arises where bars bent are left for a period in the bent condition and then reverse bent. During period between the first bend and the reverse bend the bars may strain age. The loss of ductility due to strain ageing and due to strain imposed from the first bend may cause failure during rebending operations, if the bars are not sufficiently ductile. Test results have shown that VIZAG TMT bars have withstood successfully the bending, straightening and rebending tests after ageing. The bend tests carried out at VSP have shown that these bars could be bent even around smallest dia mandrel without causing any cracking

The only plant to adapt this technology (QST) for production of rebars from the design stage. Hence, the total extent of the superior technology could be harnessed. 120 metres length of the cooling bed available for self tempering which no other mill in India can match is the testimony for this. 

We are one of the foremost Retail Trader of TMT Bars, Construction Cement, MS Bar, MS Beam, Roofing Sheet, Ms Plates, Mild Steel Angle and much more. Our professionals work in close coordination to assure a high-quality assortment of products to the customers. We have recruited a team of professionals. In addition to this, to avoid disputes in the workplace, our professionals strive dedicatedly. Owing to our fare policies and the best quality products.

Under the direction of our mentor, Mr. Thirunavukkarasu M, we are creating a long list of clients. Also, owing to his knowledge, commitment, skills, and ethical business strategies, we have been able to achieve a renowned position in the market.

A tradition of 50 years brought to life on the back of state-of-the-art technology; Bharathi stands tall as the manufacturer of the finest quality TMT bars in Kerala. An epitome of stead-fast passion for perfection, perseverance in adhering to one’sprinciples and propensity to contribute towards the progress of the nation, Bharathi TMT has emerged as one of South India’s most preferred TMT bars. Bharathi TMT attributes every achievement of ours to the invaluable support and affection from our millions of happy customers. Through world-class manufacturing innovations, new age logistics systems, a dealer network rolled out all across South India and the after sales services made available with no compromise on quality, Bharathi TMT has always led from the front in shaping the modern India.

Available Sizes:8MM 10MM 12MM 16MM 20MM 25MM

8mm, 10mm, 12mm, 16mm, 20mm, 25mm. Standard length - 12meters. 
Special length also available. 

Special Features:

• Low carbon content and made from fully killed steel.
• Higher yield strength, Ultimate tensile strength and higher percentage elongation when compared to cold twisted bars of same grade.
• Easy bendability, weldability and excellent ductility ensures economy and safety of use. o In-built ability to resist loss of strength at higher temperature.
• Require less energy for bending and re-bending along with superior reverse bending properties. o Can be butt welded or lap-welded. o Use of Fe-500 grade results in saving more than 15% in steel consumption when compared to cold twisted bars.
• Higher corrosion resistance and seismic resistance compared to CTD.
• Ideally suited for any type of concrete structure.
• Packing : Bare, in strapped bundles / piles weighing 7 to 8 metric tonnes approximately.
•  Invoicing : As per actual weight. 
• Quantity & Shipment: On mutually agreed terms

Quenching and Self Tempering (QST) imparts a composite micro structure ranging from a strong, tough, tempered martensite in the surface layer to a refined, tough, ductile ferrite-pearlite in the core with a intermediate structure in between. Superior rib design for excellent bonding with cement. Mean Projected Area much more than the specified values of the IS1786 standard.

Additional Information:

• Delivery Time: Immediate

Through world-class manufacturing innovations, new age logistics systems, a dealer network rolled out all across South India and the after sales services made available with no compromise on quality, Bharathi TMT has always led from the front in shaping the modern India.

8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm.

Unmatched Strength

The Steel making and Rolling process perfected by Sumangala over decades ensures a uniformity and consistency of strength in every TMT bar.

Superior Workability

By optimizing the manufacturing process and ensuring the right chemistry, Sumangala Steel ensures that the bars are Bendable, Bondable, and Weldable.

Enhanced Ductility

TMT bars in concrete are not only about strength but about resilience as well. It’s not just about how hard it is, it’s about how hard a hit it can take and still bounce back. The superior ductility of Sumangala TMT bars ensures flexibility and enduring reliability.

Immutable Corrosion Resistance

Our secondary steel making process augments our TMT Bars with Copper, Chromium & Nickel, providing an added layer of corrosion resistance over virgin steel bars. This is vitally important in coastal regions with salinity.

Value for Weight

Close control of sectional tolerance of every TMT bar ensures that no more or no less than the necessary amount of steel is used.

Customized Lengths

TMT bars are usually manufactured in standard lengths of 40 feet (12.2 mtrs) and sold as both, straight and bent. Our modern mill has the ability to offer customized lengths as well.

TMT bars made from 100% Billet. Rudra TMX is one stop solution for TMT requirements producing wide range of grades like Fe500, Fe500D, Fe550, Fe550D, Fe600, CRS and sizes ranging from 8mm to 40mm. Carbon Content below 0.25% in Fe500 and Fe550 and below 0.21% in Fe500D, Fe550D n Fe600.

Special Features:

• Low carbon content and made from fully killed steel.
• Higher yield strength, Ultimate tensile strength and higher percentage elongation when compared to cold twisted bars of same grade.
• Easy bendability, weldability and excellent ductility ensures economy and safety of use. o In-built ability to resist loss of strength at higher temperature.
• Require less energy for bending and re-bending along with superior reverse bending properties. o Can be butt welded or lap-welded. o Use of Fe-500 grade results in saving more than 15% in steel consumption when compared to cold twisted bars.
• Higher corrosion resistance and seismic resistance compared to CTD.
• Ideally suited for any type of concrete structure.
• Packing : Bare, in strapped bundles / piles weighing 7 to 8 metric tonnes approximately.
•  Invoicing : As per actual weight. 
• Quantity & Shipment: On mutually agreed terms

Quenching and Self Tempering (QST) imparts a composite micro structure ranging from a strong, tough, tempered martensite in the surface layer to a refined, tough, ductile ferrite-pearlite in the core with a intermediate structure in between. Superior rib design for excellent bonding with cement. Mean Projected Area much more than the specified values of the IS1786 standard.

Advantages ..of TMT (QST) Rebars of VSP Combination of high strength and high ductility VIZAG TMT bars have rare combination of high strength with excellent ductility. The tensile to yield strength ratios are always greater than 1.12. In normal bars, the increase in the yield strength of the bars is accompanied by the loss of percent elongation. But in the case of VIZAG TMT bars this loss is negligible and the percent elongation values are much higher than normally specified in various International Standards. In Fe 500D grade rebars the UTS/YS ratio values are maintained always at more than 1.15. Resistance to ageing The tests carried out on the VIZAG TMT bars, indicate that no significant change of strength as a function of time occurs which could affect the usefulness of these bars. Superior corrosion resistance The absence of Eutectoid Carbides and pearlite colonies in VIZAG TMT , absence of stresses because of tempering, presence of martensitic layer at the outside surface and formation of adherent scale film due to water quenching during rolling are the reasons for better corrosion resistance properties of these reinforcement bars.

Excellent bendability and workability The tough outer skin and the ductile core of the VIZAG TMT bars result in excellent bendability. This coupled with a high resistance to low temperature brittle fracture, allows these bars to be bent, without fear of failure around small diameter mandrels. In the reverse bend test, these bars also show good results. In the construction site, situation arises where bars bent are left for a period in the bent condition and then reverse bent. During period between the first bend and the reverse bend the bars may strain age. The loss of ductility due to strain ageing and due to strain imposed from the first bend may cause failure during rebending operations, if the bars are not sufficiently ductile. Test results have shown that VIZAG TMT bars have withstood successfully the bending, straightening and rebending tests after ageing. The bend tests carried out at VSP have shown that these bars could be bent even around smallest dia mandrel without causing any cracking

The only plant to adapt this technology (QST) for production of rebars from the design stage. Hence, the total extent of the superior technology could be harnessed. 120 metres length of the cooling bed available for self tempering which no other mill in India can match is the testimony for this.